Porcelain Button
THPG

Porcelain Button

From £59.00

Product Story

Porcelain fittings were common in the 1920s, when wall-mounted switches started becoming more affordable. These small rocker switches have a beautiful soft, glossy finish and two contrasting brass screws. The finish is a slightly creamy off-white, which complements matt painted walls as much as period wallpaper.

Read more about this range…


Product Options

For combining these round switches to create a double (or multiples), you need different backplates which are straightened on one side – see picture 5 in the gallery. NB: these will only fit onto European backboxes, not standard British rectangular ones.

You can also have symbols printed on the rockers (light, bell or key), which gives them a more utilitarian, old-fashioned feel. Contact us to see example pictures.

Apart from switches, THPG offer a selection of wiring products and functions that can be combined with these frames, such as audio speaker inputs, TV/SAT sockets and network sockets. Contact us for information on other options if you can’t find what you’re looking for.

UK power sockets
Unfortunately this style doesn't have UK socket options yet.

Clear selection

IMPORTANT

Because of its round backplate shape, this switch doesn’t fit the regular British square or rectangular wall boxes. The corners of the back box (or the hole the switch is going into) WILL SHOW.

It is perfectly possible to fit a European-style round back box, which the backplate will cover. We sell these boxes here. But this will require electrical work and decorating/plastering to make good the new wall box.

Please be aware that we don’t accept returns of this product if you find that the necessary installation/decorating work is too extensive. We kindly ask that you and your electrician make sure that they are aware of the back box incompatibility before ordering this product.

SKU: 100-THPGPOBU-R-00/01 Categories: , , , , , Brand:
000

What you need to know

What’s in the box?

This switch set consists of an insert (including button rocker and faceplate with brass fixing screws), and a round frame.


(Click image to enlarge. Pictures for illustration only. Number of gangs and/or finishes might vary)


What does an electrician call this?

This is a 1-gang 2-way 10AX switch, or a 1-gang intermediate 10AX switch

Where is this used in the home?

A 1-gang 2-way switch is commonly used for controlling a single light source from one or two places. A 1-gang intermediate is used as the middle switch of three, controlling a single light source (for example in a hallway).

 

Installation

THPG button switches are easy to install, but remember, they don't fit onto standard British back boxes! Just follow the step-by-step pictures below or go to our THPG toggle switch installation page, which are installed in a similar way. IMPORTANT: Don't over-tighten the brass screws, it could cause the porcelain centre plate to split.


Wiring


Step-by-step


(Click gallery to enlarge. Number of gangs and/or finishes might vary)


Please refer to our Installation section for more installation advice, manuals and helpful videos.


 

Dimensions

Does this cover a standard british back box?
No, a 70mm round back box is required. Check the available options below.


How deep does the back box need to be?
This needs a slightly deeper box, at least 35mm.


Recommended products:
 Back box, brick wall, single, 46mm
 Back box, hollow wall, single, 49mm

The concept

A recessed button and a soft round backplate, combined with the unusual switch material, make this design stand out and add a quirky retro touch to any interior.

Porcelain hasn’t always been unusual though. From the beginning of the electrical age and several decades to follow, the porcelain and ceramics industry was the most important provider of electrical technology: Casings, switch pieces and housings were made from this attractive material that, apart from its aesthetic qualities, has tangible technical benefits: it insulates and is extremely tough.

Together with its sibling, the Porcelain Rotary, we’re bringing this stunning material back into UK homes.

The detail

The backplate and inner frontplate are made from 100% industrial grade porcelain, the rocker button is of thermoplastic material of identical colour, for safety reasons. The finish of the plastic matches the porcelain extremely well and you can hardly tell the difference.

Two brass screws secure the frontplate to the insert and also provide a lovely rustic contrast to the white ceramic.

The whole piece with the ceramic and metal insert is noticeably heavier than plastic switches, which gives it a traditional and durable feel.

Vintage inspiration for a contemporary homes

The source

THPG have brought together a producer of electro-technical switches from Westphalia and a producer of electro-technical porcelain from Thuringia. The result is this porcelain switch system: it is both functional and pleasant in three ways: to the eye, to the touch and to the ear

All porcelain parts originate from Schierschnitz in Thuringia, where electro-technical porcelain has been produced since 1913. The porcelain is moulded under a pressure of 35-40 MPa into metal mouldings, then glazed and sintered at a temperature of 1320-1330° C.