Colona Colours Surface Mounted Switch
Katy Paty Colona Surface Mounted red porcelain light witch
Katy Paty Colona Surface Mounted red porcelain light witch
Katy Paty Colona Surface Mounted red porcelain light witch
Katy Paty Colona Surface Mounted red porcelain light witch
Katy Paty Colona Surface Mounted red porcelain light witch
Katy Paty Colona Surface Mounted red porcelain light witch
Katy Paty Colona Surface Mounted red porcelain light witch

Colona Colours Surface Mounted Switch

From £98.00

As seen on George Clarke’s “Old House New Home 2021”.

Now the stunning porcelain switches and sockets made by Katy Paty are also available in a surface-mounted version – meaning that home owners with exposed wiring can accessorise their interiors with stylish light switches too! This version is the bright and fun “Nitor” range with its exuberant primary colours!

Match with Katy Paty’s porcelain wall clips and braided cabling

Click on the “What you need to know” link for essential product details, dimensions, fitting info and more.

Katy Paty switches can be adapted to a range of sockets and connections (like AV, SAT and similar). Please contact us with any specific requirements.

Does Swtch sell UK sockets in this style?
Yes, this product range includes UK sockets. Check the "Complete the look" section below.

Clear selection
Add to Wishlist
SKU: 100-KPCOLNIT-SW-RDYEBLGN-00/01/02 Categories: , , , , , , , , , , Brand:
000

What you need to know

What’s in the box?

You will receive a modular switch set, consisting of a switch insert with integrated rocker (or 2 of them if you have chosen a 2-gang switch), a round 1-gang frame and a front plate with fixing screws.


What does an electrician call this?

This is a 1-gang 2-way 10AX switch, or 2-gang 2-way 10AX switch, or a 1-gang intermediate 10AX switch


Where is this used in the home?

A 1-gang 2-way switch is commonly used for controlling a single light source from one or two places. A 1-gang intermediate is used as the middle switch of three, controlling a single light source (for example in a hallway). A 2-gang switch is used for controlling two light sources from one or two places.


 

Installation

Attach the inner plastic wall mount to the wall first. There are knockout perforations for wiring and screwholes in the mount. Wire up the switch mechanism and screw the insert securely onto the mount. Put the porcelain casing over the plastic wall mount, place the front plate on top and align with the two front screw holes. Finally, fasten the assembly with the front screws. MAKE SURE NOT TO OVERTIGHTEN THE SCREWS – this can break the front plate and/or “lock up” the mechanism.


Wiring

Katy Paty 1-gang switch wiring


Step-by-step


(Click gallery to enlarge. Number of gangs and/or finishes might vary)


Downloads

Installation Guide:
Manufacturers instructions:


Please refer to our Installation section for more installation advice, manuals and helpful videos.

Dimensions

Does this cover a standard british back box?
Surface-mounted, so no back box required.


How deep does the back box need to be?
No back box required.


Stay swtched on!

Follow us on Instagram and Facebook or (even better) –
sign up for the Swtch newsletter and find out about product news, offers and the occasional switch story.